This amount is an estimate based on retail price. The actual amount due (shown at the final stages of your order) may be different from what is displayed here.
Items returned within 30 days of purchase with a return authorization number on the outside and inside of the return box will be credited 100%. Product returned between 31 and 60 days from purchase date is subject to a 20% restocking fee. Ultradent will not accept returns after 60 days, with the exception of machines under warranty. Errors in shipment must be reported within 14 days of invoice date. All return authorization numbers become invalid 90 days after date of issue. A return authorization number must accompany all returns to receive proper credit. Please contact Customer Service at 800.552.5512 for assistance.
Ultradent Products, Inc. ("Ultradent") warrants that this product shall, for a period of 5 years
from the date of purchase, when operated according to the operating instructions included with
the product, (i) conform in all material respects to the specifications set forth in Ultradent's
documentation accompanying the product; and (ii) be free from defects in material and
workmanship. This limited warranty is nontransferable and applies solely to the original
purchaser and does not extend to subsequent owners of the product. This limited warranty does
not cover any accessory components such as, but not limited to, batteries, chargers, adapters,
or adaptive lenses. This limited warranty is void if the product is damaged due to negligence,
abuse, misuse, accident, modification, tampering, alteration, or failure to follow the
applicable instructions for use. To qualify under this limited warranty, proof of purchase
(e.g., sales receipt or similar documentation) must be submitted to Ultradent along with the
Ultradent will either repair or replace defective products, in its sole discretion, that fall under this warranty. In no event shall Ultradent's liability for the product exceed the purchase price paid by the purchaser. Under no circumstances shall Ultradent be liable for any indirect, incidental, foreseen, unforeseen, special, or consequential damages arising out of or in connection with the use of this product.
The V3 Tab-Matrix has a pronounced ridge on the occlusal margin, producing completely natural-looking Class II composite restorations that require minimal finishing, saving time, money, and effort.
- Advanced anatomical features
- Marginal ridge saves effort and money
- Vertical contour is easy on the gingival margin
- Gingival apron is properly shaped to commonly encountered cavity form, avoiding gaps in the gingival-axial corner
- Superthin (30μm) but strong
- Tab makes handling with Triodent® Pin-Tweezers easy
Easy to Grip
Advanced Anatomical Design
See Instructions for Use for complete instructions, warnings, and precautions.
Dr. Patrick Yoshikane –
Dr. Patrick Yoshikane talks about switching from a traditional Tofflemire to the Triodent V3 sectional matrix system and how it changed the way he performs Class II restorations.
Dr. Nick Devani –
Dr. Nick Devani talks about switching from a traditional Tofflemire to the Triodent V3 sectional matrix system and how it changed the way he performs Class II restorations.
Frequently Asked Questions
How do I use the tab on the V3 Tab-Matrix?Holding the matrix by the tab in Triodent Pin-Tweezers, simply bend the tab towards you (mesially) to create a “contra-angle” handle. Then move the V3 Tab-Matrix apically into the embrasure. Try to avoid trapping gingival tissue between the matrix and the gingival margin of the cavity.
How do I prevent the little tab blocking my view of the cavity?While burnishing the V3 Tab-Matrix, bend the tab over and fold it out of the way.
How do I remove the V3 Tab-Matrix if it appears to be stuck?Firstly, peel the matrix away from the composite as far as possible on both sides using a suitable instrument. Gently rocking the matrix back and forth should then make it easy to remove. Use Triodent Pin-Tweezers to grab the hole on the wings of the V3 Tab-Matrix and wiggle the matrix out. Grabbing the tab may rip it off but the lateral holes work better. You can also try flossing (waxed floss) between the matrix and the restoration. Take care not to lacerate the gingival papillae by excessively rocking the matrix.
How do I keep the V3 Tab-Matrix in place while inserting a Wave-Wedge?If you prefer to place the V3 Tab-Matrix before the Triodent® Wave-Wedge, use a finger to trap the matrix tab against the neighboring tooth while inserting the wedge. This will prevent the matrix from sliding out of the embrasure.
Can I place the V3 Tab-Matrix after placing the wedge?Yes. In fact this is usually the best way to do it. Place the Wave-Wedge first, BEFORE cavity prep. This pre-wedging prevents bleeding, separates the teeth slightly and positions the wedge more apically, thereby allowing the contact point to be lower. The wedge will also depress the interproximal gingivae and rubber dam and protect both from the high-speed bur. Most of the time you will then be able to slide the V3 Tab-Matrix into place without removing the wedge.
How can I be sure that the composite has completely cured inside the V3 Tab-Matrix?To ensure complete curing of the composite, fold the wings of the V3 Tab-Matrix back (after removing the ring and wedges) and cure from the buccal and lingual sides.
How do I get the greatest benefit out of the rolled marginal ridge on the V3 Tab-Matrix?Positioned correctly, the rolled marginal ridge on the V3 Tab-Matrix will save you a lot of time in finishing because it closely replicates the natural anatomy of the tooth. To maximize the benefits of the ridge, take care to position the band exactly. If it won’t go into the ideal position, slide the edge out while trapping the tab of the matrix against the neighboring tooth, then push the wedge back in. This method also eliminates the possibility of a gingival tag protruding into the cavity box.
How can I stop hooking the tab of the V3 Tab-Matrix when I go to release the Pin-Tweezers?Triodent Pin-Tweezers have a gold tip on one side, which indicates the side with the pin. Insert the matrix with the gold tip facing away from the occlusal surface. Then when you release the tweezers, the pin will be well away from the tab.
When doing an MOD, the matrix band side extrusions are too long and get in the way of the opposing matrix band.The easy way around this is to place the yellow V3 Ring on the tooth, trapping the matrix band in place, then bend the protruding ends of the matrix backwards to make room for the opposite matrix band.