Temporary Crown & Bridge Material

ExperTemp temporary crown and bridge material is a bis-acryl composite provisional material used to fabricate temporary crowns, bridges, inlays, and onlays as well as long-term temporaries. The 10:1 self-cured chemistry is easy to work with and provides exceptional strength, flexibility, and abrasion resistance.1 Superior performance combined with a natural esthetic make ExperTemp material the material of choice for temporization.

  • Easy to trim and polishes beautifully
  • Low oxygen inhibition at polymerization
  • Possesses high abrasion resistance and flexibility1
  • Available in multiple shades: A1, A2, A3, A3.5, B1, and Bleach White
  • Can be repaired with a packable composite, a flowable composite, or additional ExperTemp material
  • ExperTemp material fluoresces similarly to enamel1
  • Use with ExperTemp Mixing tips

Technical Details

Flexural Modulus


​Comparison to competitors.1

Edge Chip


Comparison to competitors.1

Bis-acryl Composite Provisional Material

ExperTemp material is perfect for fabricating temporary crowns, bridges, inlays, onlays, as well as long-term temporaries.

The Two-Component System

The multi-functional acryl composite is produced using no Bisphenol-A or Bisphenol-A precursors in the manufacturing process. It has similar properties to a filling material and is available in the following shades: A1, A2, A3, A3.5, B1, and Bleach White. ExperTemp material restorations can also be adjusted and customized using light-curing composite.

Sold Directly to Licensed Dental Professionals Only

Ultradent is committed to supporting the dental community. ExperTemp material is only sold directly to licensed dental professionals.


ExperTemp Temporary Crown & Bridge Material Procedure

See Instructions for Use for complete instructions, warnings, and precautions.

Step 1

Crown preparation.

Step 2

​Low oxygen-inhibition layer.

Step 3

​Trims easily; cuts like a composite.

Step 4

​Won't ball up in acrylic bur during shaping.

Step 5

​Bis-acryl formula allows high polishability.

Step 6

​Provisional is cemented and seated.

Step 7

​Does not require diamond polish.

Step 8

​Provisional closely resembles natural dentition.


​"In 25 years of practicing dentistry I have never seen a temporary crown and bridge material like ExperTemp.  It trims and polishes like a nano hybrid composite and its strength is unsurpassed.  It is perfect for single crowns as well as long span bridges.  I wouldn't practice without it!"

Hal Stewart, DDS – Flower Mound, TX

Frequently Asked Questions

  • Does ExperTemp material need to be polished?

    Once the oxygen inhibition layer is wiped away, ExperTemp material will already have a natural luster and clinicians may choose not to polish. For additional esthetics, we found that polishing the provisional with the yellow Jiffy polisher, then the white Jiffy polisher, followed by the Jiffy Goat Hair Brush or a polishing wheel will provide an exceptional, life-like polish (no diamond polish needed.) For highly esthetic temporaries, clinicians may choose to place PermaSeal composite sealer on the surface for a glazing effect.

  • If a temporary made with ExperTemp material was to chip or break, how can it be repaired?

    Provisionals can be repaired with a packable composite, a flowable composite, or additional ExperTemp material.

  • How should ExperTemp material be stored?

    ExperTemp material should be stored at room temperature. (18°C to 29°C / 65°F to 85°F). Once a cartridge of ExperTemp material has been started, the product will remain stable until the indicated expiration date. When storing between uses, leave the mixing tip in place after dispensing. The material will harden in the tip, essentially becoming the new cap.

  • Does ExperTemp material contain Bisphenol A (BPA)?

    No, this material does not contain BPA, which is stated in the product instructions.

  • How many crowns can be made with one cartridge of ExperTemp material?

    The answer to this will vary based on several factors, but one cartridge will yield approximately 40–50 crowns.

  • 1. Data on file.