ChlorCid™, ChlorCid™ V, ChlorCid™ Surf

3% Sodium Hypochlorite Solutions

ChlorCid, ChlorCid V, and ChlorCid Surf solutions contain 3% sodium hypochlorite.

ChlorCid V solution is more viscous for enhanced flow control and lubrication, if desired.

ChlorCid Surf solution includes surfactant to modify surface tension. This allows irrigants to flow into remote areas of the root canal for a deeper clean.

  • Ideal for irrigation during endodontic procedures
  • Removes organic tissue during root canal therapies

*Shipping laws require that the 480ml bottles be shipped by ground transportation. The 480ml bottles are currently only available in the USA.


Technical Details

Organic Tissue in the Canal

​When in the canal, ChlorCid, ChlorCid V, and ChlorCid Surf solutions dissolve soft tissue and act as a file lubricant.

IndiSpense Syringe

​Verify flow of all syringes prior to applying intraorally. If resistance is met, replace tip and recheck. To avoid cross contamination, do not re-use tips.

Customer Reviews

Procedures

Establish Patency

See Instructions for Use for complete instructions, warnings, and precautions.

Step 1

Fill canal with ChlorCid V solution (3% NaOCI), and then place a small amount of File-Eze file lubricant (19% EDTA in a water-soluble viscous solution) at canal orifice.

Step 2

After scouting the canal with a #10 or #15 SS Endo-Eze Hand K-File, use the Genius #30 .08 orifice shaper with Genius motor in Rotation P1 mode in the straight part of the canal.

Step 3

​Irrigate with 3–5 ml of ChlorCid solution. File-Eze solution is no longer needed in procedure.

Step 4

​Fill canal with ChlorCid V solution.

Step 5

Take a #15 (or larger) SS Endo-Eze Hand K-File and establish the working length. Use the Endo-Eze FIND apex locator to determine the foramen position.

Step 6

​Irrigate with 3–5 ml of ChlorCid solution.

Preparation and Glide Path

See Instructions for Use for complete instructions, warnings, and precautions.

Step 1

​Fill canal with ChlorCid V solution.

Step 2

Create a glide path using a #15 SS Endo-Eze Hand K-File to the working length. Using watch-winding movements, open space until the file is loose.

Step 3

In calcified canals, move to a #20 SS Endo-Eze Hand K-File to the working length in watch-winding movements. Use the file until it is loose.

Step 4

​Irrigate with additional 3–5 ml of ChlorCid solution.

Instrumentation/Obturation

See Instructions for Use for complete instructions, warnings, and precautions.

Step 1

​Fill canal with ChlorCid V solution.

Step 2

Use #25 .04 Genius File with Genius motor in Reciprocation GEN mode to the working length.

Step 3

​Irrigate with additional 3–5 ml of ChlorCid solution.

Step 4

​Fill canal with ChlorCid V solution.

Step 5

Depending on the anatomical shape of the canal (curved and narrow, curved, or straight) use one of the following apical final enlargement Genius files:

  • #30.04: Curved and Narrow canal
  • #35.04: Curved canal
  • #40.04 or #50.04: Straight canal

Use the chosen final file in Reciprocation GEN mode to the working length. After opening space, remove the file, press the mode button on the Genius motor to switch to Rotation P1 mode and, with the same file in rotation, finish removing debris.

Step 6

​Irrigate with additional 3–5 ml of ChlorCid solution.

Step 7

Evacuate with the Ultradent Luer Vacuum Adapter and Capillary tip.

Step 8

Fill canal with Ultradent EDTA 18% solution. Leave for approximately 60 seconds.

Step 9

​Evacuate with the Ultradent Luer Vacuum Adapter and Capillary tip.

Step 10

Soak with Consepsis 2% chlorhexidine gluconate solution. Leave for approximately 3–5 minutes.

Step 11

​Evacuate with the Ultradent Luer Vacuum Adapter and Capillary tip.

Step 12

Dry with paper points for 1–2 seconds (each point should be damp approximately 1–3 mm at tip).

Step 13

Canal should be damp, NOT desiccated, prior to obturation with EndoREZ canal sealer.