Uveneer® Extra

Direct Composite Template System
Uveneer Extra Kit
Uveneer Extra

The Uveneer Extra direct composite template kit complements the original Uveneer template kit with four new minimally invasive upper anterior templates—Extra Large, Large, Medium, and Square. Each template creates beautiful composite veneers with predictable shape and symmetry and an incredibly natural esthetic. Because the designs for the Uveneer Extra templates have been based on scans of actual teeth, they require minimal adjusting or polishing to achieve your desired results. Like the original Uveneer templates, Uveneer Extra templates are designed to create high-quality anterior restorations in one visit using innovations that help achieve a refined, anatomically correct, high-gloss restoration in a fraction of the time than if done freehand. Results are both reproducible and predictable.

Uveneer Extra template with annotations

Based on Real Teeth for Natural Looking Veneers

Uveneer Extra direct composite templates retain all of the trusted qualities of the original Uveneer templates, but with a new, even more natural looking design. Uveneer Extra templates are molded from scans of real teeth, featuring Dr. Jan Hajto’s work. This has given the Uveneer Extra template system unique natural contours that can be seen on each template, making it easy to create beautiful composite restorations. The additional sizes of Extra Large and Square add to the unique potential of your patient’s smile in the upper anterior range.

Uveneer Extra before and after courtesy of Dr. Rafael Beolchi. Courtesy of Dr. Rafael Beolchi.

Simple to Use for Fast & Cost-Effective Veneers

Uveneer Extra direct composite templates make it easy to create beautiful veneers for every patient, every time. Their unique templated design allows you to create high-quality anterior restorations—that require minimal adjusting or polishing—faster than sculpting each restoration by hand. They can also be used for cosmetic mock-ups and shade selections, as well as temporary veneers during porcelain veneer creation. They can be used on individual or multiple teeth and are autoclavable* so they can be used again and again. The ease and speed of the Uveneer Extra template system will enhance the efficiency of any practice.

*Base in which templates arrive is not autoclavable, rather only the templates themselves. Do NOT autoclave the base.
Uveneer Extra 4 Row Kit Side By Side

Features Innovative Medical Grade Technology

Uveneer Extra templates are made from medical grade translucent plastic that allows light to pass through to the composite during curing and works with any light-cured composite resin. Uveneer Extra templates leave a finished glossy and contoured surface by preventing an oxygen inhibition layer from forming during the curing process. Each template has been treated with a nonstick coating allowing them to easily release from the cured composite during the procedure.

Uveneer Extra Individual Veneers

Includes Templates for Maxillary Anterior Teeth, Canine to Canine

The full Uveneer Extra template system kit features 24 templates in total, including four sizes: Extra Large, Large, Medium, and Square. Each size consists of six maxillary templates from canine to canine. Each Uveneer Extra template is numbered to correspond with tooth number and template size to assist in correct placement.

Individual replacement templates are also available; please call our customer service department at 888.230.1420 to order.
Ultradent exclusive Uveneer Extra 4 Row Kit Solo

Exclusive to Ultradent—the Only Direct Composite Veneer Template System

The Uveneer template system is the only template system designed to create beautiful direct composite veneers in one visit and is exclusive to Ultradent. With Uveneer and Uveneer Extra templates, clinicians can create veneers with predictable shape and symmetry every time, for every patient.

Schedule a Free Virtual Demo

Visit our virtual demo landing page to schedule your virtual demo with one of our product experts.

Customer Reviews

Procedures

Uveneer Direct Composite Template System Step by Step

See Instructions for Use for complete instructions, warnings, and precautions.

Step 1

Choose Mosaic universal composite or preferred composite shade(s). Select the template that corresponds with the tooth being restored. See handle of template for corresponding tooth number, size, and arch.

Step 2

Remove all caries if needed and minimally prepare the tooth.​

Step 3

Place interproximal separating matrices and apply Ultra-Etch etchant, Peak SE Primer, or preferred etch.

Step 4

​Rinse etch according to manufacturer’s instructions. Do not rinse if using Peak SE Primer.

Step 5

Apply Peak Universal Bond adhesive or preferred adhesive to tooth surface.

Step 6

Light cure with VALO curing light 1 x 10 seconds on Standard Power. If using other curing light, cure according to manufacturer instructions.

Step 7

Apply Mosaic universal composite or preferred composite directly onto tooth.

Step 8

​Do not light cure composite.

Step 9

​Select chosen Uveneer template. Template should ideally cover the entire facial surface of the tooth. If not, additional composite may be used at the periphery to compensate.

Step 10

​Align centerline of template parallel to the midline of the face and perpendicular to the incisal plane. Using thumb, press the concave side of the selected template onto the tooth. Press firmly to remove any trapped air.

Step 11

​Remove any excess composite from the periphery.

Step 12

​Using VALO curing light, cure composite through template. For every 2mm layer, cure 12 x 10 seconds on Standard Power, 12 x 4 seconds on High Power, or 12 x 3 seconds on Xtra Power. If using other curing light, cure according to manufacturer instructions.

Step 13

​Remove the Uveneer template by gently lifting the handle. Using VALO curing light do final cure directly onto composite. To ensure composite is cured thoroughly, for every 2mm layer, cure 3 x 10 seconds on Standard Power, 3 x 4 seconds on High Power, or 3 x 3 seconds on Xtra Power. If using other curing light, cure according to manufacturer instructions.

Step 14

Avoiding the glossy facial surface, trim excess composite from periphery with a fine flameshaped bur in Jiffy Composite Finishing Bur Kit. Use Jiffy Composite Polishers, Brushes, Diamond Strips, or Proximal Saws for minimal finishing and adjusting if desired.

Step 15

​Immediately after use, thoroughly wipe template with alcohol pad, dry, bag, and autoclave according to Uveneer template IFU. Do not leave any composite residue on the template in order to maintain translucency and shine.

Step 16