ViscoStat™20% Ferric Sulfate
This amount is an estimate based on retail price. The actual amount due (shown at the final stages of your order) may be different from what is displayed here.
Return Policy Items returned within 30 days of purchase with a return authorization number on the outside and inside of the return box will be credited 100%. See full details
Items returned within 30 days of purchase with a return authorization number on the outside and inside of the return box will be credited 100%. Product returned between 31 and 60 days from purchase date is subject to a 20% restocking fee. Ultradent will not accept returns after 60 days, with the exception of machines under warranty. Errors in shipment must be reported within 14 days of invoice date. All return authorization numbers become invalid 90 days after date of issue. A return authorization number must accompany all returns to receive proper credit. Please contact Customer Service at 800.552.5512 for assistance.
ViscoStat hemostatic is a 20% ferric sulfate equivalent solution with inert binding agents in a viscous, aqueous vehicle. It has a pH of ~1.0 and contains patented, fumed silica to limit the acidic activity, making it kind to hard and soft tissue.
- Causes profound hemostasis
- Stops bleeding in seconds, saving chair time
- Provides unsurpassed kindness to hard and soft tissues
- Eliminates sulcular fluid contamination for optimal bonding
- Decreases costly impression remakes
Indications for Use
ViscoStat hemostatic solution is suited for a variety of dental and oral surgery procedures to arrest surface capillary bleeding. Such procedures include fixed prosthodontics, restorative-operative, periodontal treatment, etc. ViscoStat hemostatic is also recommended for retrofillings, canine impactions, gingivectomies, and as a “fixative” for pulpotomies. ViscoStat hemostatic can also be used to prevent leakage caused by sulcular fluid contamination during direct bonding procedures. Soak Ultrapak™ knitted retraction cord in hemostatic and isolate the tissues, following with a firm air/water spray.
Tissue Management Is the Key to Quality Direct and Indirect Restorations
Hemostasis and Fluid Control
Easy to Dispense with the IndiSpense Syringe
Protects Tissues and Leaves Smear Layer Intact
Provides Profound Hemostasis in SecondsThe faster hemostasis can be achieved, the faster you can perform quality dentistry for the patient. For most cases, ViscoStat hemostatic solution provides profound hemostasis in just a matter of seconds.
Kind to Hard and Soft TissuesWith a pH of approximately 1, ViscoStat hemostatic solution is one of the kindest hemostatics to be placed against mineralized tooth structure. ViscoStat hemostatic is formulated with patented binding and coating agents to protect tissue while achieving profound hemostasis and sulcular fluid control in seconds.
ViscoStat hemostatic solution is formulated with a patented fumed silica to buffer acidity and offer a more viscous consistency that will not run or drip. This makes precise placement of ViscoStat hemostatic easy, regardless of the location in the mouth.
Decreases Costly Impression RemakesQuality tissue management is essential to accurate impressions. When impressions are made with fluid present in the sulcus, the quality of the impression suffers and the impression often needs to be remade. Because ViscoStat hemostatic eliminates bleeding and sulcular fluid, it creates the optimal environment for perfect impressions.
Tissue Management Technique Step by Step
– See Instructions for Use for complete instructions, warnings, and precautions.
1Burnish the hemostatic agents firmly against the sulcus until bleeding stops. (No more coagulum forms.)
2A blunt, bent cannula with padded "scrub brush" enables infusing and cleaning in the cut sulcus.
3Apply firm air/water spray to remove residual coagulum and test tissue for quality, profound hemostasis. If bleeding continues, repeat infusion technique.
After complete hemostasis has been reached, excellent retraction is achieved through the use of Ultrapak™ knitted cord.
"I can't live without ViscoStat because it takes seconds to save an hour and stops the bleeding when nothing else will. Now I don't have to re-prep for impressions."
"[ViscoStat] is convenient, dependable, and effective in bothersome clinical bleeding situations. It is the product of choice when others fail to do the job."
"ViscoStat has allowed me to take clean, dry, accurate impressions even in some of the most hemorrhagic situations. Thank you! I appreciate it, my lab man appreciates it, and my patients appreciate it."
"ViscoStat can stop bleeding on the cervical area of a crown prep like nothing else I have ever seen! It is a miracle solution! I wish I knew how many thousands of hours it has saved me over the years. Thank you, Ultradent!"
"Controlling bleeding is almost an everyday procedure. To improve fine impressions of crown margins I rely on ViscoStat to control bleeding, leaving a dry open field for impression material."
"Without a doubt I would be lost without ViscoStat! It quickly stops sulcular bleeding, allowing me to place the Ultrapak cord and get an excellent impression on the first try. It is also great to use when bonding composites near gingival tissues. ViscoStat is a vital part of my crown prep and composite armamentarium."
"I use ViscoStat in my practice on an almost daily basis–in fact, it's a product that is a MUST HAVE for me! It's absolutely vital when seating crowns. After removing the temporary crowns and doing try-in of the definitive crowns I always use ViscoStat to control the gum tissue hemorrhage. It works absolutely AMAZING and provides a clean, dry field for me to deliver the crowns without compromising the marginal integrity as the cement cures!"
Is ViscoStat hemostatic solution more powerful than Astringedent™ hemostatic solution?
Yes. ViscoStat hemostatic is a 20% ferric sulfate solution, and Astringedent hemostatic is a 15.5% ferric sulfate solution.
Can ViscoStat hemostatic be used with an epinephrine preparation?
No. When a ferric sulfate solution like ViscoStat hemostatic is used with an epinephrine preparation, a blue/black precipitate will occur.
How do I know that I’ve achieved hemostasis with ViscoStat hemostatic solution?
Hemostasis is realized when the new coagulum stops forming. By burnishing the gingival margin with the Metal Dento-Infusor tip, ViscoStat hemostatic is delivered to the capillary openings, stopping the bleeding. After ViscoStat hemostatic has been delivered to the preparation and rubbed into the sulcus, test the preparation with a firm air/water spray. If bleeding resumes, rub additional ViscoStat hemostatic into the preparation and test again. When no bleeding occurs after a firm air/water spray, profound hemostasis has been achieved.
How fast is hemostasis achieved with ViscoStat hemostatic solution?
ViscoStat hemostatic solution is capable of providing hemostasis in a matter of seconds. Depending on the patient’s periodontal and systemic health, hemostasis may be achieved in as little as 2–3 passes around the sulcus or as many as 20 or 30.