Home Products Impressions Thermo Clone VPS Story
Shop Now Shop Now
 

MAKE THE RIGHT FIRST IMPRESSION

thermoClone
Thermo Clone impression material is designed to capture even the finest features quickly and accurately. The results? Clear impressions with detailed margins—the first time.

Thermal-Accelerated Set

Thermo CloneTM impression material is temperature sensitive. This means that as the temperature of the material increases, the setting time decreases. We call this Thermal-Accelerated Set.


At room temperature, Thermo CloneTM material stays malleable, with a working time of up to 1:30. Once the tray is placed in the patient’s mouth, the material rapidly begins to set due to the increased temperature. This accelerated setting time means there’s less chance of distortion. See below for a comparison of setting times for Thermo CloneTM material versus a leading competitor. Both tests were conducted on heavy body fast set materials. The materials were placed into an environment that simulated a patient’s mouth and were continually tested to determine the setting stage.


ThermoClone Impression  
ThermoClone Graph

Note: The Critical Zone denotes the time between when the material starts to set intraorally and when it is completely set. This is when distortions most often occur, resulting in extra lab work, poorly fitting restorations, and costly retakes.


  1. Thermo CloneTM material has a working time of up to 1:30. There is no minimum working time; Thermal-Accelerated Set ensures that the material begins to set as soon as it is placed in the patients’ mouth.

  2. Thermo CloneTM material is out of the critical zone in 80 seconds.

  3. In this data set, Themo Clone material was fully set 90 seconds after being placed in the simulated mouth.*

    *Please refer to the Instructions for Use for recommended intraoral time.
ThermoClone Graph

Note: The Critical Zone denotes the time between when the material starts to set intraorally and when it is completely set. This is when distortions most often occur, resulting in extra lab work, poorly fitting restorations, and costly retakes.


  1. The competitor’s material has a maximum and minimum working time of 35 seconds. The material begins to set at the same time regardless of when it is placed in the mouth.

  2. The material stays in the Critical Zone for 3:30.

  3. In this data set, the material was completely set 3:55 after being placed in the simulated mouth.

The results: Thermal-Accelerated Set gives you a long working time, a short setting time, and minimal time in the critical zone.

Designed to Capture Every Detail

thermoClone is Hydrophilic

Hydrophilic

Hydrophilicity ensures precision in your impressions by displacing moisture so the material can reach every part of every tooth.


Hydrophilicity is evaluated based on contact angle, which measures how a drop of water spreads on the material. With a contact angle of 40°, Thermo Clone material is among the industry leaders in hydrophilicity.

Strong and Stable

Impressions made with inferior material often tear at the margin and require retakes. Thermo Clone material has a high tear strength, which means you can remove the set impression with confidence.


Plus, the material’s excellent dimensional stability and elastic recovery ensures the impression arrives at the lab in the same condition it left your patient’s mouth.

thermoClone is Strong and Stable

Available in Multiple Sizes

Thermo Clone impression material is available in 50 ml cartridges or 380 ml jumbo cartridges that fit any automatic mixing machine.


With an automatic mixing machine and the easy-to-use dynamic mixing tip, prepping to fill a tray is easy!

thermoClone is easy to mix thermoClone is easy to mix
thermoClone

Vinyl Polysiloxane Impression Material

thermoClone

Thermo CloneTM VPS

Vinyl Polysiloxane Impression Material

Impression Material Kits
kits

Kits and Accessories

shop now
  • Thermal-accelerated for a faster intraoral setting time
  • Premium vinyl polysiloxane produces reliable, consistent outcomes
  • Super hydrophilic material adapts well to a wet environment
  • Thixotropic properties allow the material to flow into the spaces between teeth to capture every essential detail, including the margin
  • High tear strength
  • Excellent dimensional stability
  • Regular and Fast set times
​​​​