Request Information

* Indicates Required Field

PQ1®

Single-Resin Bonding
About Quantity Discounts

Return Policy Items returned within 30 days of purchase with a return authorization number on the outside and inside of the return box will be credited 100%. See full details

Product Details

PQ1 is a syringe-delivered, single-component, light-cured resin that uses ethyl alcohol as a solvent. It is 40% filled and radiopaque. PQ1 bonds to dentin/enamel, cast metal, porcelain, amalgam, and composite.

  • High bond strength helps prevent microleakage1,2
  • Radiopaque
  • Easy to use
  • Places directly
  • Cures with all lights

 

Indications for Use

PQ1

Use for almost all bonding needs in restorative dentistry. Chemical-cured luting and chemical-cured composites, namely PermaFlo® DC, also bond to light-cured PQ1. PQ1 is conducive for bonding to dentin and enamel using composite or amalgam, porcelain, metal, and composite repair.

Clinicals

PQ1®

Highly Filled Chemistry

​Note exceptional filler penetration for high-strength bonding.

Photos courtesy of Professor Marcos Vargas.

Technical Details

Syringe Delivery

​Delivered via syringe, PQ1 is easy to place directly where you need it.

Gluten Free

​This Ultradent product is certified gluten free, so it fits in with the lifestyles of patients from any background.

Sold Directly to Licensed Dental Professionals Only

​Ultradent is committed to supporting the dental community. PQ1 is only sold directly to licensed dental professionals.

Unmatched Quality

​The name Ultradent is synonymous with quality. All of our research and development is done in-house. So is our manufacturing and quality control. This allows us to guide and oversee the entire process—from the time an Ultradent innovation is conceived to the time it’s created and packaged for shipping. We have met the strictest standards, and our facility is ISO 9001 certified. This ensures every product performs exactly as it’s supposed to for you and for your patients.

Procedures

PQ1 Step by Step

  1. 1

    ​Etch.

  2. 2

    ​Prime/bond in one.

  3. 3

    Finished restoration.

Testimonials

  • ​"I have used Prime and Bond,* Single Bond,* Solo Bond,* and a few others. The consistency of results has been better with PQ1 than with any of the others, and 90% of the time, there is less sensitivity."

    *Trademark of a company other than Ultradent.

    Dr. Robert Anderson – Clearfield, UT
  • ​"Before using PQ1, I did not trust my adhesive. Mechanical retention was still my only security. Since switching to PQ1, I don't need undercuts in my preps and I no longer use any pins."

    Dr. Michael Stephens – San Antonio, TX

FAQs

  • Can I use PQ1 with all curing lights?

    PQ1 cures with all lights, however, we do not recommend use with argon lasers.​

  • What kind of filler is found in PQ1?

    ​The fillers are silica dioxide and FluorUtite.

  • What is the film thickness of PQ1?

    ​PQ1 can be thinned to 2µm.

  • What type of monomer does PQ1 contain?

    ​PQ1 is BisGMA based but also contains other methacrylate-based hydrophilic monomers.

  • How does a highly-filled bonding resin create a higher bond strength?

    ​Fillers in bonding agents facilitate stronger bonds because their presence reduces polymerization shrinkage, has a lower coefficient of expansion, and reduction in water absorption of the bonding resin. When resins cure, they shrink and the fillers provide a basic structure to counteract that shrinkage. When two different materials such as a resin and a tooth are exposed to temperature changes, they expand and contract at different rates. The fillers placed in resins typically have a coefficient of expansion that is similar to that of a tooth; therefore, the tooth and the resin expand and contract more closely to the same amount, placing less force on the tooth resin interface. Unfilled resins absorb water which cause them to distort through a process called hydrolysis. The addition of fillers reduces the amount or degree of water absorption. This places less detrimental force on the tooth bonding resin interface. The addition of fillers reduces the loss of bonding resin at the margin, and increases the strength of resins. All of these improved physical properties make the use of a filled bonding resin preferable over an unfilled bonding resin.

  • Are there any instances where the etch step may be skipped with PQ1?

    ​The only instances where the etch step can be skipped is on deciduous teeth, deep subgingival class V, or deep subgingival class II preparations. In these cases, etching may initiate bleeding. Acid etch is not just important for roughening the bonding surface; it is also important for cleaning this surface. If the doctor skips the etch step, they should apply some Consepsis prior to placing the restoration. For the best bonds, however, the doctors should still etch.

  1. Shear Bond comparison PQ1 Immediate to Dentin. 2001. Data on file.
  2. Post Operative Tooth Sensitivity, Clinical Research Associates Newsletter 1999 Nov: 23(11)3.